Your Metal Roofing Supplier for Central Florida.
FL Building Code Approved
35+ Colors in Stock
Winter Garden · Kissimmee · Tampa
+1200 Contractors trust in SYL
Metal Roof Systems, Stocked and Code-Approved
Exposed Fastener (5V, PBR & Rib)
The fast, cost-efficient choice. Available in 26 and 24 gauge with matched screws, closures, and trim.
Standing Seam (1", 1.5", 1.75" & 2")
No exposed screws, clean architectural lines, and concealed-clip strength for high-wind zones. Stocked in 24 and 26 gauge Calibres 0.3 / 0.32 Galvalume & 0.40 Aluminium
Galvalume & Aluminum (24/26/29ga)
Aluminum (.032/.040) for coastal salt-air; Galvalume for inland value and strength. We'll spec the right metal and gauge for the building and the budget.
Trim & Flashing That Match the Panel — In Stock
Ridge Caps
Eave Drips
Directs runoff off the fascia and protects the deck edge.
Wall Flashing
Weatherproofs roof-to-wall transitions against wind-driven rain.
Valleys & Transitions
Channels high-volume runoff where roof planes meet.
Gable Rakes
Finishes the gable edge and locks down panels against uplift.
Trim & Flashing That Match the Panel — In Stock
A metal roof is only as good as its details. We stock factory-matched trim for PBR, Rib, and standing seam profiles, in the same colors and gauges as your panels.
Ridge Caps
Seals and finishes the peak; vented options for attic airflow.
Eave Drips
Directs runoff off the fascia and protects the deck edge.
Wall Flashing
Weatherproofs roof-to-wall transitions against wind-driven rain.
Gable Rakes
Finishes the gable edge and locks down panels against uplift.
Valleys & Transitions
Channels high-volume runoff where roof planes meet.
35+ COLORS
Kynar-grade and SMP finishes engineered for Florida UV and salt air. Order chips or download the full color catalog before you spec.
SMP tab 26GA:
Silicone-modified polyester — value-priced, durable color for residential roof.
PVDF tab (24GA/ALUM):
Kynar 500 / PVDF — premium fade and chalk resistance for architectural and coastal projects.
Disclaimer:
On-screen colors are approximate. Request physical chips before final spec.
35+ Architectural Colors, In Stock
Kynar-grade and SMP finishes engineered for Florida UV and salt air. Order chips or download the full color catalog before you spec.
SMP tab (26GA/29GA):
Silicone-modified polyester — value-priced, durable color for residential and agricultural roofs.
PVDF tab (24GA/ALUM):
Kynar 500 / PVDF — premium fade and chalk resistance for architectural and coastal projects.
Disclaimer under swatches:
On-screen colors are approximate. Request physical chips before final spec.
Get the 2026 Catalog — Specs, Profiles & Colors
Full panel and trim specifications. Sent straight to your inbox.
Frequently Asked Questions
Everything about our metal roof systems: durability, complete components, high-temperature underlayments, delivery logistics, and custom orders.
01. Why are metal roofs an excellent choice for customers in Florida?
02. Do you supply all the necessary components for a metal roof installation?
Yes. We stock complete systems: panels, factory-matched trim, Titanium PSU 30 high-temp underlayment, specialized fasteners, adjustable lead flashings, Boss Multi-Seal sealants, and vents. Order the whole roof from one supplier so your crew isn’t waiting on a missing closure or the wrong screw mid-job.
03. Do you carry underlayment rated for the heat under metal panels?
Yes. We stock high-temp peel-and-stick membranes like Titanium PSU 30(Dupont or Polyglass MTS), built to withstand the elevated temperatures under metal roofing without breaking down. Standard underlayments degrade under that heat — a high-temp membrane protects the deck and the panel warranty.
04. Can you deliver large metal panels directly to the job site without damage?
Yes. We deliver long panels on proper equipment with crane and on-site options, secured to prevent bending, scratching, or oil-canning. Next-day delivery is available across Central Florida, and we coordinate drop location and timing so panels arrive job-ready.
05. Can I order custom colors or special profiles?
Yes. Beyond our 35+ in-stock colors, we order custom colors and special profiles directly from the manufacturer. Tell us the project requirements and we’ll confirm exact lead times and a quote up front.
06. Do you sell to homeowners or only contractors?
Both. We’re a supplier built for roofing contractors — Pro and VIP accounts, invoicing, rewards — but homeowners and self-builders can buy too. Everyone gets the same code-approved materials and delivery options.
07. How fast can I get a quote and delivery?
Quote requests are typically answered within one business day. In-stock products can be delivered quickly or with express pickup in Winter Garden, Kissimmee and Tampa. Custom colors and profiles come with confirmed manufacturer lead times, typically within 3-7 business days.
08. What gauge and material should I choose?
Use aluminum (.032/.040) for coastal, salt-air locations; Galvalume for inland value and strength. 24ga suits architectural standing seam; 26ga balances cost and durability; Tell us the building and location and we’ll spec it.
09. Is a metal roof worth it versus asphalt shingles in Florida?
Usually, yes — over the full lifespan. Metal costs more up front but lasts 40-70 years, withstands higher winds, and reflects heat to lower cooling bills (verify). Asphalt is cheaper to install but typically needs replacement in 15-20 years, often sooner after a major storm.
Ready to Spec Your Next Metal Roof?
Talk to the team in Winter Garden, Kissimmee or Tampa. and get materials to your job site.